parquet

WOOD PLASTIC COMPOSITES

WPC divides into two parts: one being solid and the other being hollow. The inner surface of the hollow structure can produce a smooth and rough inner surface with the mold technology.


FEATURES

According to the plastic substrate, WPC divides into PVC, PE, PP, PS, and ABS, and even products of PBT and PET are in development. Even though PVC is inflammable, it still has environmental protection issue. PE plastic wood has a large consumption; however, the oily wax texture of the material has low heat resistance, poor foaming, poor printing performance, and a product shrinkage; PP plastic wood has a wax texture and can withstand high temperature. Although the secondary processing has the risk of cracking, the appearance and texture are identical to a real wood, hence It can very well be done without post-production.

WPC Foam Board
WPC Product
According to the foaming agent, WPC products divide into foamed and non-foamed WPC. After foaming, WPC can not only reduce weight but also can be processed by ordinary woodworking equipment, with wood cutting, sawing, adhering and nailing, hence easier to thermoform.

WPC products categorize into single-layered and co-extrusion. Traditional single extrusion WPC is lack of climate resilience and wear proof. Long-term outdoor exposure can cause tarnishing, crumbling, staining, mold growth, etc. However, the skin layer of a WPC co-extrusion product uses WPC recycling material or foaming to enhance climate resilience and the texture of the WPC products.
Surface treatment technology: sanding, embossing, coating, and thermal transfer. The surface of WPC floor is quite slick, in order to prevent slipping, the surface of the WPC floor needs processes through a sanding machine or a wire drawing machine; WPC floor is sanded and then embossed for improvement. Therefore, the wooden floor is non-slip and wear proof.


Machine line

WPC Extrusion Machine Line
WPC Extrusion Machine Line

Our new generation high-level WPC extruder can produce products close to real wood grain color as well as proceeding double layered co-extrusion at the same time. The wood products are more suitable for the outdoor climate and are slip-resistant. WPC products are currently applied in assembly of summer houses, roofing tiles, stairs, tables, and chairs, etc.

Success story

Case EMD-75 WPC Extrusion Line

EMD-75 WPC EXTRUSION LINE

WPC Extrusion Line Testing WPC Extrusion Line in Japan location: Japan Everplast successfully installed WPC Extrusion Lines in Japan. Everplast extrusion line is using EMD-75 75mm parallel type twin screw profile extruder with 80-100kg/hr for WPC profile product. The buyer would like to use WPC product as decking. Everplast is ...
READ MORE…
Wood Plastic Composite Extrusion Line

Wood Plastic Composite Extrusion Line

Wood Plastic Composite Extrusion Line Testing Wood Plastic Composite Extrusion Line in Indonesia location: Indonesia Wood Plastic Composite consist of wood flour/fiber and thermoplastic, which can be used as the sustitution for wood. The advantage of WPC are durability which do not corrode easily and rot resist, also prevent Marine ...
READ MORE…

Related Products

WPC Extrusion Machine Line

WPC Extrusion Machine Line

WPC Extrusion Machine Line Our new generation high-level WPC extruder can produce products close to real wood grain color as well as proceeding double layered co-extrusion at the same time. The wood products are more suitable for the outdoor climate ...
READ MORE…
Parallel Type Twin Screw Extruder Machine

Parallel Type Twin Screw Extruder Machine

Parallel Type Twin Screw Extruder Machine We provide the EMD-65 ~ EMD-130 parallel twin-screw extruder of different models for customer needs. Send Products Inquiry FEATURES PVC counter rotating twin extruder available in sizes of EMD-65, EMD-90 and EMD-130 for profile ...
READ MORE…

Send Products Inquiry to Us

To provide with better services, pleaser fill out the form below.